Features

• The wire connector  is suitable for the centralized termination of 28 AWG  ribbon cables.
• Guaranteed minimum contact force of 2.0 N
• Due to the addition of the positioning spring assembly, it can resist friction and corrosion
• The flexible combination of wire-to-board and board-to-board provides designers with more options for selection.

Features

• High and high configuration of polarized nails to avoid incorrect insertion of plugs and sockets;
• Can be equipped with gold-plated or tin-plated terminals.
• High temperature resistant plastic shell material.
•  Suitable for flat cable wire-to-board connection, can be used for signal and low load current of up to 1.2 A, with a pitch of 1.27mm.

FEATURES

• .050″ (1.27 mm) pitch
• High-performance contacts
• All common pin counts from 4 to 25
• Choice of socket and plug terminations
• Exceptionally low profile .200″ (5.08 mm)
• Variety of options including strain relief
• Mating shrouded & ejector terminal strips
• Wide variety of standard wiring configurations

FEATURES

• No Cable stripping; simultaneous termination of all conductors
• Terminates varying thicknesses of flat, woven, shielded (properly prepared) and other ribbon cable with conductors on .050 (1.27) centers as well as discrete wires
• Positive, uniform latching of contacts and housing with cover eliminates cover warpage
• Receptacles with recessed covers provide positive locking feature for ejection style pin headers with latches

Features:

• Highly reliable contact design with independent and synchronized spring.
• Low insertion and withdrawal force.
• Insulator protects contacts from damage.
• Mating height is only 11.8mm.
• Ability to make “daisy chain” cable assemblies.
• Connectors with the Eject-Lock mechanism, allowing one-handed insertion and release.
• PCB side connector variations: Straight, Right angle and SMT.

Features:

• Available in gold-plated and tin-plated models
• Center polarization key that prevents mismating
• Locking ramps that provide a strong retention force to the header
• Locking windows that ensure firm locking to the receptacle
• Marking feature that provides marking for first circuit location

FEATURES

• High-performance terminal structure design.
• Low 5.08 mm (.200″) profile.
• Pin range: 8P~50P.
• Wide variety of standard wiring configurations.
• Mating shrouded & ejector terminal strips.

FEATURES

• The terminal adopts double contact points to increase the contact area of the core and make the signal transmission more stable
• The double-sided design of the cover is more diversified, and the wave hole and round hole design are suitable for electronic wires and flat wires.
• The product surface is equipped with an anti-loosening pairing buckle, the product can be used in a complex vibration environment without pairing loosening

Features:

• .100″ (2.54 mm) pitch
• Most common pin counts from 2 to 30.
• Low profile/slim body design.
• Wide variety of standard wiring configurations.
• Gray and color coded cable.
• No special cable preparation is required, manual assembly is possible, double-blade contacts.

Features:

• Slim Body Double-Row IDC Socket Assemblies, 0.100″ Pitch
• Double U-shaped slot ID part
• Any pin count from 4 to 64
• Double ended with termination to socket strip available
• Interchangeable wires and connectors
• Wide variety of wiring options including reverses, daisy chains, etc.

Features:

• Meet the demand for high contact density signal or power connectors.
• It can carry up to 8.5A of current.
• 2 to 24 for single and dual row.
• Micro-Fit 3.00mm Low Force Terminal.
• There are a variety of cable lengths to choose from, and the pitch is 3.00mm.

Features:

• 17% reduction in pitch over similar power connectors
• Optional TPA (Terminal Position Assurance) retainer
• Ultra low mating force terminal
• Positive-lock housing with anti-snag design
• Fully isolated terminals

Features:

• There are four choices of 1, 2, 3 and 4 positions
• Surface mount and through hole
• Closed-end and straight-through
• 18-24 AWG stranded wire and solid wire
• Redundant dual IDC slots
• Wire layout visual window
• Tool-free crimping.

Features:

• The crimping piercing wire harness is produced and processed by fully automatic equipment,
• Realize wire-to-board W-B connection in a very small space.
• The smallest crimpable wire AWG#36
• Suitable for small size plug-in and safe termination, the product is equipped with friction locking mechanism or full locking mechanism